Sterling TC 120 Series Temperature Control Unit

The Sterling Sterlco® TC120 Series Now Available for Quick Build+

The  Sterlco® TC120 Series Water Temperature Control Units provide highly accurate control for production applications requiring a continuous supply of temperature-controlled water.

Innovative design promotes turbulent water flow to maximize heat transfer performance. High flow pumps with 32°F to 250°F (0°C to 121°C) setpoint operating range. The cast-and-flange design reduces connection points by 40% while including high-efficiency pumps that offer higher flow rates at lower pressures. These highly efficient products maintain temperatures to within 1°F of setpoint, allowing for tighter temperature control and improved throughput.

Sterling Sterlco TC120 Temperature Control Unit

Standard Features

  • Compact design with easy-access side panels for rapid maintenance
  • Programmable auto vent sequence to automatically vent air from the system at start-up
  • Independent high temperature safety thermostat to protect from heater overload
  • Motor branch circuit over-current/over lead protection
  • Integrated cooling solenoid valves for efficient unit cooling
  • Forward-facing liquid-filled To and From Process pressure gauges
  • 9kW dual circuit immersion heater with IEC contractors
  • Operator friendly PID temperature controller with Process and Setpoint LED readouts and straightforward unit performance data
  • Graphic control panel with indicator and warning status lights
  • Adjustable low supply water pressure switch; 16 psig (1.1 bar)
  • 150 psig (10.3 bars) pressure relief valve
  • SICB/carbon pump seal to maximize pump life
  • 0.75” water supply connection, 1.5” process connections; valve size matches drain size
  • Quick cool for rapid unit cooling

Optional Features

  • Advanced M2C Controller
  • 12 kW, 18 kW, or 24 kW heater options
  • Maintained START/STOP switch
  • Closed loop heat exchanger, model varies with unit sizes
  • General fault audio/visual alarm to alert operators of unit issues
  • Pressure regulator/relief valve for water supply
  • Auto system water purge
  • Y-strainer to protect unit from high particulate fluid
  • 300°F (149°C) operations, includes silicon carbide/silicon carbide seal (requires 55 psig (379 kPa/3.8 bar) water supply pressure)
  • Non-fused lockable rotary through door disconnect

Quick Build+ Program Now Available

How it Works

Quick Build+ For TC120 Model

You select:

1) Base

2) Mechanical Options

Units are shipped within 2-3 weeks of order acknowledgement

1: Pick One of Each Base Option

Heater: 9 kW or 12 kW
Pump Size: 3/4 hp, 1 hp, or 2 hp
Solenoid Valve: 1/4” (Cv=0.5) or 1/2” (Cv=4.0)
Controller: Eurotherm or Advanced M2C

2: Choose Any Mechanical Options

Hammer Arrestor
Auto system water purge
Manual bypass
Y-strainer
Rubber feet (instead of casters)

LET’S DO BUSINESS