Inline

High Shear Mixer Use

• Typical Applications: Dispersion, Emulsions, Particle Size Reductions
• Wetting out of difficult powders; such as xanthium gum, guar gum, carbopol
• Reducing particle sizes
• Shear mixing without air entrapment
• Mixing powders into liquids; such as starches
• Elimination of lumps and agglomerations; such as milk and whey powders
• Suitable for viscosities in excess of 50,000 cps
• High flow for quick batch turnover and fast process times
• Food, Pharmaceutical, Cosmetic, Personal Care & Chemical applications

ADMIX DYNASHEAR

• Ideal for sanitary total washdown CIP & SIP installations
• Two Stage shear design to dissolve, deagglomerate, disperse and emulsify
• High shear & high flow up to 65 gpm for model 425 and 165 gpm for model 575
• Heavy Duty, no wear parts or bushings to replace in product zone
• Meets 3A – TVP approved to display symbol
• Cabable of size reduction down to 2-3 micron with a narrow distribution profile.
• 316L product contact surfaces

ADMIX BOSTON SHEARMILL

• High intensity wet milling, emulsifying and particle reduction
• Three sets of shear heads, each has two stages for six work zones in one unit.

• Wide range of interchangeable of shear head stators and rotors.
• High shear & high flow up to 250 gpm, 10-125 HP
• Extreme Heavy Duty, shaft seal suitable for up to 750 psi
• Meets 3A – TVP approved to display symbol
• Cabable of size reduction down to less than 1 micron for soft droplets and 1-2 micron for hard particles with a narrow distribution profile.
• 316L product contact surfaces

These mixers are applied to applications typically referred to by the following terms:

• Blending
• Emulsification
• Homogenization
• Solids incorporation
• Solids suspension
• Particle size reduction
• Gas dispersion
• Rapid mixing
• Shear mixing
• Batch mixer
• Solids liquids mixer

To See More, please go to: www.admix.com