Chilling Systems

Manufactured by: Sterling , Sterlco, ACS

Recirculated Chiller Packages – Portable and Central Systems – ½ to 200 Tons Capacity

30RB Outdoor Series Air Cooled Chiller with high efficiency scroll compressors. Can be roof mounted, installed on concrete pad or piers. Cooling capabilities from 60 ton up to 200 tons and water or glycol setpoint ranges of 40F up to 85F. Chillers can operate in ambient temperatures of -20F up to 125F. Environmentally friendly refrigerant.

30RAOutdoor Series Air Cooled Chiller with high efficiency scroll compressors. Can be roof mounted, installed on concrete pad or piers. Cooling capabilities from 10 ton up to 60 tons and water or glycol setpoint ranges of 40F up to 85F. Chillers can operate in ambient temperatures of -20F up to 125F.

CT/CW Series Cooling Tower or Chilled Water Pump Tanks. Standard sizes range from 140 to 6,285 gallons with pump sizes from 1.5 to 100 hp. Flow rates can be adjusted on each pump tank, depending on the customer’s needs. Standard with stainless steel reservoir and diamond-plate pump deck.

RTCW Series Frictionless Chillers offer the latest energy saving, magnetic bearing compressor technology and are 32% more efficient than screw compressor chillers at part load. Indoor water cooled condenser design. Cooling capabilities from 120 ton up to 190 tons and water or glycol setpoint ranges of 40F to 60F. Environmentally friendly refrigerant.

SSC Series Central Chiller with high efficiency scroll compressors. Reliable industrial design with two completely independent and redundant refrigeration circuits and an Allen Bradley PLC. Cooling capabilities from 30 ton up to 100 tons and water or glycol setpoint ranges of 30F up to 65F. Water cooled or remote outdoor condensers available.

SMC Series Compact Portable Chiller. Space saving, portable, self-contained air cooled design. Cooling capabilities from ½ ton up to 1.5 tons and water or glycol setpoint range of 32F to 75F.

SMC Series Portable Chiller. Portable, self-contained design with high efficiency scroll compressors. Cooling capabilities from 2 ton up to 40 tons and water or glycol setpoint ranges of -30F up to 75F. Integral air cooled, water cooled, or remote outdoor condensers available, as well as completely outdoor systems.

SWK Series Winter Kooler is an outdoor supplemental water / glycol chilling unit. This Fluid Cooler can be used as a stand-alone system, for a clean, closed loop heat transfer alternative to a Cooling Tower . Or for Northern climates, these units can automatically and efficiency be used to air-cool chilled water, giving a typical payback of 1 – 2 years in energy savings gained from not running chiller compressors, during colder months.

Sterling's SF Series Fiberglass Cooling Towers have an induced-draft counter flow design which offers superior construction with horizontal seams assuring leak-free operation, reduced operating costs, long life and easy installation. Available in 50 to 200 tons.

Sterlco M Series Cooling Tower are an energy-efficient induced-draft cross flow design which is pre-assembled, and feature galvanized components and PVC fill for corrosion protection. Available in sizes 10 tons up to 175 tons.

Sterlco NC Series induced-draft counter flow Cooling Towers feature high-efficiency water distribution across both sections as well as galvanized walls for corrosion protection, with stainless steel cooling tower construction available. Sizes range from 135 tons to 600+ tons per cell.

Sterlco STWM Series Water Management System is a complete system that automatically controls Scale, Corrosion and Micro-biological fouling in both open and closed recirculating cooling water systems.