Sterling Royal Series Water Temperature Control Unit

 

 

 

 

Royal Series Water Temperature Control Unit:

Royal Series TCU Series Water Temperature Control Units provide highly accurate control for production applications requiring a continuous supply of temperature-controlled water.

Innovative design promotes turbulent water flow to maximize heat transfer performance. High flow pumps with 32°F to 250°F (0°C to 121°C) setpoint operating range. The cast-and-flange design reduces connection points by 40% while including high-efficiency pumps that offer higher flow rates at lower pressures. These highly efficient products maintain temperatures to within 1°F of setpoint,allowing for tighter temperature control and improved throughput.

 

 

 

 

 

 

 

 

 

 

 

Standard Features:

  • Compact design with easy-access side panels for rapid maintenance
  • Programable auto vent sequence to automatically vent air from the system at start-up
  • Independent high temperature safety thermostat to protect from heater overload
  • Motor branch circuit overcurrent/overlead protection
  • Integrated cooling solenoid valves for efficient unit cooling
  • Forward-facing liquid-filled To and From Process pressure gauges
  • Non-fused lockable rotary through door disconnect
  • 9kW dual stage immersion heater with IEC contactors
  • Operator friendly PID temperature controller with Process and Setpoint LED readouts and straightforward unit performance data
  • Graphic control panel with indicator and warning status lights
  • Adjustable low supply water pressure switch; 16 psig (1.1 bar)
  • 150 psig (10.3 bars) pressure relief valve
  • SICB/carbon pump seal to maximize pump life
  • 0.75” water supply connection, 1.5” process connections; valve size matches drain size

Optional Features:

  • Advanced Controller
  • Compact units offer 12 kW, 18 kW, or 24 kW heater options
  • Upright units offer 9 kW through 24 kW plus 36 kW or 48 kW heater options
  • Maintained START/STOP switch
  • Closed loop heat exchanger, model varies with unit sizes
  • General fault audio/visual alarm to alert operators of unit issues
  • Quick cool switch w/3216, w/Acv. Ctr. for rapid unit cooling
  • Pressure regulator/relief valve for water supply
  • Auto system water purge
  • Y-strainer to protect unit from high particulate fluid
  • Multi-zone capable with factory installed wiring and/or piping. Not available in all configurations
  • 300°F (149°C) operations, includes silicon carbide/silicon carbide seal (requires 55 psig (379 kPa/3.8 bar) water supply pressure)

Spare Parts:

Contact R-Cap today with your equipment’s Serial Number and we can provide you with correct spare parts guaranteed & certified manufacture made

Models available for Quickship:

Orders submitted before 11am CST will ship same business day in most cases for models below

ROYAL SERIES COMPACT WATER TCU (M2B2010)

  • Water Processing Temperature: 32 – 250F (0 – 121C )
  • 1 hp
  • 9kw
  • 1/4” solenoid
  • M2B+ Controller
  • 230/3/60 Voltage

M2B2010D.9.1.2.2

ROYAL SERIES COMPACT WATER TCU (M2B2010D)

  • Water Processing Temperature: 32 – 250F (0 – 121C )
  • 1 hp
  • 9kw
  • 1/4” solenoid
  • M2B+ Controller
  • 460/3/60 Voltage

SE.007.3.4

ROYAL SERIES COMPACT WATER TCU (M2B2010F)

  • Water Processing Temperature: 32 – 250F (0 – 121C )
  • 2 hp
  • 12kw
  • 1/2” solenoid
  • M2B+ Controller
  • 460/3/60 Voltage

M2B2010F.12.2.4.2

ROYAL SERIES COMPACT WATER TCU (M2B2010C)

  • Water Processing Temperature: 32 – 250F (0 – 121C )
  • 3/4 hp
  • 9kw
  • 1/4” solenoid
  • M2B+ Controller
  • 460/3/60 Voltage

M2B2010C.9.1.4.2

ROYAL SERIES COMPACT WATER TCU (G2010C)

  • Water Processing Temperature: 32 – 250F (0 – 121C )
  • 3/4 hp
  • 9kw
  • 1/4” solenoid
  • Eurotherm Controller
  • 460/3/60 Voltage

G2010C.9.1.4.2

ROYAL SERIES COMPACT WATER TCU (M2B2010C)

  • Water Processing Temperature: 32 – 250F (0 – 121C )
  • 3/4 hp
  • 9kw
  • 1/4” solenoid
  • M2B+ Controller
  • 230/3/60 Voltage

M2B2010C.9.1.2.2

ROYAL SERIES COMPACT WATER TCU (G2010C)

  • Water Processing Temperature: 32 – 250F (0 – 121C )
  • 3/4 hp
  • 9kw
  • 1/4” solenoid
  • Eurotherm Controller
  • 230/3/60 Voltage

G2010C.9.1.2.2

ROYAL SERIES COMPACT WATER TCU (M2B2010D)

  • Water Processing Temperature: 32 – 250F (0 – 121C )
  • 1 hp
  • 12kw
  • 1/4” solenoid
  • M2B+ Controller
  • 460/3/60 Voltage

M2B2010D.12.1.4.2

ROYAL SERIES COMPACT WATER TCU (G2010D)

  • Water Processing Temperature: 32 – 250F (0 – 121C )
  • 1 hp
  • 12kw
  • 1/4” solenoid
  • Eurotherm Controller
  • 460/3/60 Voltage

G2010D.12.1.4.2

ROYAL SERIES COMPACT WATER TCU (G2010D)

  • Water Processing Temperature: 32 – 250F (0 – 121C )
  • 1 hp
  • 9kw
  • 1/4” solenoid
  • Eurotherm Controller
  • 460/3/60 Voltage

G2010D.9.1.4.2